Paradyne 1813 User Manual Download

Page: 37 / 135

Command Line Interface User’s Guide

Type

1483mer

to display the command to set up an MER entry. The command usage is

shown below. For the port parameter specified in the command, always type

mer0

. Only one

MER entry can be created.

EXAMPLE

If the sndcp prompt pops up, a PVC 0/35 is successfully created for MER mode.

3.6.3

PART 3 Set up an IP address for the WAN interface

1. Return to the home prompt and type the following command.

If you need the usage of the ifconfig command, type

ifconfig

2. If the WAN IP address is successfully set up, the home prompt pops up.

3.6.4

PART 4 Delete the PVC for MER

To delete the PVC set up for the MER, you must delete the profile first under the sndcp prompt.
Secondly, delete the VC under the atm prompt. The following screen is an example.

1800-A2-GB20-00

Summary of Contents for 1813








































































































































Search results

Summary of Contents for 1813

Reviews:

Related manuals for 1813

Brands by name

Popular brands

Paradyne 1813, User Manual

Search results

Summary of Contents for 1813

Reviews:

Related manuals for 1813

Brands by name

Popular brands