manualshive.com logo in svg

Paradyne 1813, User Manual

Share
Download
Paradyne 1813 User Manual Download Page 87

 

 

 

Command Line Interface User’s Guide 

httpproxy -o –display 

This option is used to display the configured information of httpproxy. 

 

httpproxy -o -stat 

This option is used to display the statistics of the connections passing through the httpproxy, 
including inbound packets, outbound packets, inbound bytes, and outbound bytes.  

 

httpproxy -o -auth[enable/disable] 

This option is used to enable or disable the authentication module in httppproxy. 

 

5.8

 

DHCP server 

start 

stop 

subnet 

host 

lease 

 

The dhcpserver commands configure the DHCP server function. They are put in the dhcpserver 
directory. There is a pre-set DHCP subnet entry. To configure a new subnet  

 

1. If it is run, use the stop command to stop it.  

2. Use the

 subnet if delete

 command to delete the subnet. 

3. Use the 

subnet add… 

command to configure the new subnet. 

4. Use the 

start

 command to run the new subnet. 

 

5.8.1

 

start 

start 

Starts the DHCP server. The subnet and host commands are used to configure DHCP server. 

 

EXAMPLE 

[1234 @ dhcpserver]$ start 

DHCP Server started !!! 

1800-A2-GB20-00 

                  

87

 

Summary of Contents for 1813








































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands