manualshive.com logo in svg

Paradyne 1813, User Manual

Share
Download
Paradyne 1813 User Manual Download Page 55

 

 

 

Command Line Interface User’s Guide 

off 

This disables the ARP proxy 

 

5.3.2

 

pvc 

pvc add/delete port vpi vci encapsulation -o <-vpn OUI vpnId>   

The 

pvc 

command attaches a PVC to the WAN interface. 

 

COMMAND DESCRIPTION 

add 

This adds the specified PVC to the bridge. 

delete 

This deletes the specified PVC to the bridge. 

<port> 

A string identifying the wan interfaces e.g. atm0. 

<vpi> <vci> 

Virtual Path Identifier and Virtual Circuit Identifier for the ATM connection. 

<encapsulation> 

This specifies the encapsulation type. The possible values are llc or vc which represent Logical 
Link Control or VC multiplexing respectively. 

- vpn OUI vpnId   

Enable VPN Encapsulation on this interface. The OUI (Organizationally Unique Identifier) and 
VPN identifier are specified as numbers. 

 

5.3.3

 

group 

group if if  

 

 

group if if –o if 

The 

group 

command assigns or groups two interfaces or three interfaces to the bridge. To group 

two interfaces, use the command: 

group if if  

 

 

To group three interfaces, use the command 

group if if –o if 

 

1800-A2-GB20-00 

                  

55

 

Summary of Contents for 1813








































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands