Panduit ATLONA OmniStream 101 Manual Download Page 92

Page: 92 / 147

Using OmniStream

™

with Velocity

™

Device Manager

Description

Provides the option of assigning descriptive name to the unit.

Location

Provides the option of assigning a description of where the unit is located.

Timezone

Displays the time zone format. Click the

SET TIMEZONE

button, to assign the time zone.

Date/Time

Displays the current date and time. Click the

SET DATE/TIME

button to set these values.

Uptime

Displays the elapsed time since the unit was powered-on or rebooted.

System Temperature

Displays the ambient enlosure temperature.

Die Temperature

Displays the value returned from the die temperature sensor (DTS) on the chip of the PCB.

Power Consumption

Displays the precise power consumption of the encoder.

Hostname

Displays the hostname of the encoder. OmniStream encoders and decoders are assigned a default hostname, which

can be changed.

NTP Server

Displays the NTP server. This field is set to

pool.ntp.org

by default. Click this field to enter the desired NTP

server address.

Buttons

Click this toggle switch to enable or disable the front-panel buttons. If the buttons are disabled, their backlight turns

off. When enabled, the toggle switch will be green.

LEDs

Click this toggle switch to enable or disable

all

front-panel LED indicators and button backlight indicators.

The Velocity/OmniStream Interface

System Mode

Click this drop-down list to select the system mode. The default setting is

VCx

Mode

Description

VCx

This is the default mode and represents the latest codec technology from Atlona, with

outstanding support for computer graphics and motion video. VCx includes support for

4K60 4:4:4 fast switching, dual streaming from AT-OMNI-111 encoders, and multiview

on the decoders.

VC-2 Video

Legacy OmniStream codec that provides the best viewing experience when streaming

motion graphics and/or video.

VC-2 PC application

Legacy OmniStream codec that optimizes the image when viewing static images, such

as spreadsheets or similar content.

Summary of Contents for ATLONA OmniStream 101




















































































































































Search results

Summary of Contents for ATLONA OmniStream 101

Reviews:

Related manuals for ATLONA OmniStream 101

Brands by name

Popular brands

Panduit ATLONA OmniStream 101, Manual

Search results

Summary of Contents for ATLONA OmniStream 101

Reviews:

Related manuals for ATLONA OmniStream 101

Brands by name

Popular brands