Using OmniStream
™
with Velocity
™
Device Manager
84
Device Operation
Slate mode
Description
Off
Disables the image from being displayed.
Manual
The image will always be displayed, superimposed on the source signal, and will
remain even if the source signal is lost.
Auto
The image will only be displayed when the source signal is lost.
For example, this mode is useful in conference room applications for displaying
system instructions when no sources are connected.
Deleting Slates
Deleting Logos
1. Click
INPUT
in the menu bar.
2. Under the
Encoder
window group(s), click the
Slate Mode
drop-down list and select
Off
.
3. Click the
SAVE
button at the bottom of the window group to commit changes.
4. Click
OTHER
in the menu bar, then click
Logo
in the side menu.
5. Click the
DELETE
button for the logo to be removed.
1. Click
OTHER
in the menu bar, then click
Logo
in the side menu.
2. Under the
Logo Insertion
window group(s), click the
Enable
button (if enabled) to disable the feature.
3. Click the
SAVE
button at the bottom of the window group to commit changes.
4. Click the
DELETE
button for the logo to be removed.
14. Click the
INPUT
menu.
15. Click the
Slate Mode
drop-down list, and select
Off
,
Manual
, or
Auto
.
16.
Click the
Slate Logo
drop-down list and select the desired image. If
Slate Mode
is set to
Off
, then this field will
not be visible.
17. Click the
SAVE
button to apply all changes.
