Using OmniStream
™
with Velocity
™
Device Manager
75
AES67 Audio
AES67 audio is a standard for high-performance audio streaming over IP, providing several features such as
synchronization, media clock identification, and connection management. AES67 does not support bitstream/
compressed audio formats, such as Dolby® Digital, and others. Source audio must be transmitted as LPCM up to
eight channels at 192 kHz / 24-bit.
Device Operation
1. Go to the encoder, click
SESSION
in the menu bar, then locate the
Audio
section under the desired stream.
Click the
Enable AES67
toggle switch to enable this feature. When enabled, the toggle switch will be green.
2. Select the type of downmixing from the
Downmixing
drop-down list, if desired. Available options are:
None
,
Mono
, and
Stereo
.
3. Click the
SAVE
button within the
Stream
window group.
4. Go to the decoder interface and click
OTHER
in the menu bar.
5. Click
SAP
in the left menu bar.
6.
Click the
Enable
toggle switch to enable SAP. When enabled, the toggle switch will be green. If the decoder,
Dante controller, or DSP is to receive AES67 audio, this step is
required
.
7. Click the
SAVE
button in the
SAP
window group.
NOTE:
If the Enable AES67 toggle switch is enabled, the SAP will also be enabled.
1
2
3
