Using OmniStream
™
with Velocity
™
Device Manager
50
Device Operation
IMPORTANT:
When configuring streams above 1920x1080p,
Encoder 1
must be used.
8.
Click the
Thumbnail
>
Enable
toggle switch to enable thumbnails of the source. This will verify that the input
source is configured correctly and will provide a visual reference for the encoder stream. Thumbnails are
updated every 2 seconds.
9. Click the
SAVE
button, under the
Encoder 1
window group, to commit changes.
10. Under the
Encoder 2
window group, select
HDMI Input 1
from the
Input
drop-down list.
11. Set the
Max Bit Rate
field to
150
.
12. Click the
Scaler
drop-down list and select
1920x1080
.
13. Click the
SAVE
button, under the
Encoder 2
window group, to commit changes.
14. Click
SESSION
in the menu bar and configure each video stream using the information in the table bellow.
Audio streams will not be configured for this tutorial.
1. Click
DEVICE INFO
in the menu bar, then click the
System Mode
drop-down list and select
VCx
. Click the
SAVE
button to commit changes.
2. Click the
INPUT
menu.
3. Under the
HDMI Input 1
window group, select
Default HDR MCH
from the
EDID
drop-down list.
4. Click the
Supported Version
drop-down list and select
2.2
. Click the
SAVE
button, under the
HDMI Input 1
window group, to commit changes.
5. Under the
Encoder 1
window group, click the
Input
drop-down list and select
HDMI Input 1
.
6.
Set the
Max bit rate
field to
750
. This will cover resolutions up to 4K60 4:4:4.
7. Click the
Scaler
drop-down list and select
3840x2160
.
Encoder #2
This encoder is used with a 4K source and will be configured to dual-stream 4K and 1080p.
Stream
Interface
Encoder
Destination
Multicast/Unicast Address
Destination UDP Port
Stream 1
eth1
Encoder 1
226.0.0.3
1000
Stream 2
eth1
Encoder 2
226.0.0.4
1000
15. Click the
SAVE
button, under both
Stream 1
and
Stream 2
window groups, to commit changes.