Using OmniStream
™
with Velocity
™
Device Manager
76
1. Go to the encoder, click
SESSION
in the menu bar, and locate the
Encoder Groups
section. Click the
Enable
Encoder Groups
toggle switch. When enabled, the toggle switch will be green.
2. Locate
Encoder Groups
and enter a name for the group in the
Group Name
field. The default group names for
Stream 1
and
Stream 2
are
session1
and
session2
, respectively.
3. Under
Members
, click the
ADD
button.
Device Operation
Encoder Grouping
Grouping encoders allows a group of encoders to feed a single decoder, simultaneously. The stream will be
displayed by the decoder using either manual or automatic input-selection, based on the presence of a source
signal.
1
2
3
4
5
IMPORTANT:
The IP address for each encoder must be added to the group. This includes the
IP address of the encoder that is being used to create the group.
4.
Enter the IP address of the encoder to be added to the group.
5. Click the
SUBMIT
button.
6.
Repeat steps 3 through 5 for each encoder to be added to the encoder group.
