Panasonic YC-300BP2YAF, Operating Instructions Manual

Page: 38 / 64

Operation
OMCTT5639E09
38
6.3.8 Reproducing welding conditions
• Welding can be done by reproduction of any desired
condition selected from the stored welding conditions.
• A reproduced welding condition can be changed as
desired. (Once changed, it turns to be different from the
original condition any more.)
• To store any revised welding condition, use a new pro -
gram number, or store it with the original number by
overwriting unless any inconvenience is caused.
“FUNCTION” button
JOG dial
Operation Set-value display LCD display
1
• Set “FUNCTION” button to “PLAY.”
Note
The screen on the right
appears on the digital amme -
ter.
2
• Turn the JOG dial and select a program number to
be reproduced.
* The stored program numbers are indicated in
ascending order. (If there is no program stored, the
display is still indicating “ P-- ” when turning the
JOG dial.
(In case of reproducing
"P01")
3 • Press the JOG dial to reproduce.
• To cancel the reproduction or if there is no program to reproduce, set “FUNCTION” button to “WELD”.
JOG to Sel. No.
Press to Confirm