manualshive.com logo in svg

Panasonic Section 700, Operation, Page: 72 / 289

Share
Download
Panasonic Section 700 Operation Download Page 72

Section 700   Operation

Chapter 2. System Features

Novell

Telephony

Server

Novell Network

 CO

Trunk Lines

DBS

Serial

Line

API Port

Telephone 

Related Programming

l 

 (System): API Port Type

l 

 (System): API Baud Rate

Hard ware Requirements

l

VB-43941 Telephony Services Kit. This kit includes a Panasonic API
Card, the API Serial Connector (two ports) and one 3 

 floppy disk

containing the Telephony Services DBS Driver 

l

A Novell 3.12 (or later), 486 (or greater) server with at least 8 megabytes
of RAM and equipped with an available serial port of at least 9600 baud
capacity (16550 UART required).

l

One customized serial cable (provided). The RS232 limits should not be
exceeded (50 feet).

 

 

 

Summary of Contents for Section 700


































































































































































































































































































Reviews:

No comments