Panasonic Section 700, Operation, Page: 166 / 289

Chapter 4. Key Telephone Features
Section 700 Operation
Tone Calling.
With tone calls, a ringing tone is sent to the called extension.
System programming determines whether the DBS uses voice or tone calling
as a default. voice calling is the default, dialing “1” after the extension
number changes the call to a tone call. If tone calling is the default, dialing
“1” results in a voice call.
To make a Voice Call:
!. Pick up the handset.
The phone issues intercom dial tone.
Note:
If you are calling from an extension programmed for Prime Line
Preference, press the FF key programmed for intercom operation.
2. Dial the extension number or
3. If the system default is tone calling, dial “I
l
-‘Talk-EXT XXX” (where “XXX” is the extension) appears on the
display. If the extension name has been stored, that name appears on
the display after “Talk” instead of
XX.”
.
l
The EXT LED lights.
4. Complete the call and the handset.
The EXT LED goes off.
To transfer a call using Voice Calling:
Press the HOLD key.
l
The EXT LED flashes.
l
“Hold-EXT XXX” (where “XXX” is the extension) appears on the
display.
2. Dial the number of the extension to which the call will be transferred.
3. If the system default is tone calling, dial “1.”
“Talk-EXT XXX” (where “XXX” is the extension) appears on the
display.