Panasonic Section 700, Operation, Page: 148 / 289

Chapter 4. Key Telephone Features
Section 700 Operation
2.
Dial
the telephone number.
The dialed number appears on the display.
3. Complete the call and replace the handset.
l
The line LED changes from green to red and then goes off.
l
The
time and
date
reappears on the display.
Related Programming
l
(System): SMDR Display Start for CO Calls
l
FF5 (FF Keys): FF Key Assignments for Extensions
Considerations
l
The duration of a call appears on the display while the call is in progress (if
enabled in programming).
l
In CPC-A and CPC-B Versions prior to 3.1, the SMDR Display Start
Tier can be set to start 16 or 30 seconds after the last digit of the
telephone number is dialed.
In and CPC-B Version 3.01 or higher, the timer can be set to start
at 5, 16, or 30 seconds.
Conference Calls
(All Versions)
Description
Conference Calls allow an extension user to add a party to an existing
conversation.
Extension users can create the following types of Conference Calls:
l
One outside line and two extensions
l
Two outside lines and one extension
l
One outside line and three extensions
l
Two outside lines and two extensions