Panasonic Section 700, Operation, Page: 20 / 289

Section 700 Operation
Chapter 2. System Features
Account Codes
can assign account codes to clients to facilitate billing and to call
dates and times, numbers called, and outside line numbers used. This
information is printed for each account on the SMDR record.
Non-Verified Account Codes
(CPC-A, and CPC-B Versions prior to 3.1 and 6.0 and higher)
Description
In CPC-A and CPC-B Versions prior to 3.1, account codes are not verified.
With
and with CPC-B Versions 6.0 and higher, account codes may
be verified or non-verified depending on system programming.
Non-verified account codes can or
voluntary,
depending on
extension programming.
With voluntary account codes, the user is not forced to enter an account
code
before making a call. With forced account codes, the user must enter an
account
code
before accessing an outside line.
Non-verified accountcodes can be assigned to incoming and outgoing calls.
To assign an account code to an outgoing call, the user enters the account
code before making the call or during the call. To assign an account code to
an incoming call, the user enters the account code during the call.
To enter an Account Code before dialing:
1. Press the
ON/OFF
key.
l
The phone issues intercom dial tone.
l
The
ON/OFF
LED lights.
2.
Press the
AUTO
key, then press
l
“Enter Account appears on the display.
l
If you are using a Single Line Telephone (SLT) or Digital Single Line
Telephone (DSLT), dial
3. Enter the Account Code (up to 10 digits).
4.
Press
DBS-70-700
DBS Manual Issued
Page 2-3