Panasonic Section 700, Operation, Page: 139 / 289

Section 700 Operation
Chapter 4. Key Telephone Features
3.
Press “3.”
l
The
EXT
LED flashes.
l
“Call Wait XXX” (where “XXX” is the extension) appears on the
display.
4. If you want to send a text message, dial the desired message code (5-9).
The corresponding message displays on the called party’s phone. (If the
called party does not have a display, the party continues to hear a call
waiting signal.)
5. Remain on the line until the called party picks up.
To answer Call Waiting:
1. The
EXT
LED flashes, indicating Call Waiting has been sent.
“Call Wait XXX” (where “XXX” is the extension number) appears on the
display.
2. Replace the handset.
l
The current call is disconnected.
l
“Call Wait-XXX” appears on the display.
3. Pick up the handset.
l
You are automatically connected to the extension sending the Call
Waiting.
l
“Talk-EXT XXX” appears on the display.
Note:
To answer a call waiting tone, you may flash the switchhook rather
than hang up. If you flash the switchhook, you are immediately connected
to the waiting party; the other party is dropped.
To answer Call Waiting using the Talk Back key:
A “Talk Back” key can be assigned to an FF key. The Talk Back key
allows you to answer a waiting call without disconnecting the original call.
1. The LED of the Talk Back key flashes red, indicating Call Waiting has
been sent.
2. Press the Talk Back key to answer Call Waiting.