manualshive.com logo in svg

Panasonic Section 700, Operation, Page: 32 / 289

Share
Download
Panasonic Section 700 Operation Download Page 32

Section 700   Operation

Chapter 2.  

 teatures

Related Programming

l 

 (System): 

Multiple DID (CPC-B Version 3.1 or higher)

l

 

(Extension): Inbound DID Dial Number (CPC-B Version 2.0 to 2.16)

l

FF4 (Ring): DID, Delayed, Night , Delayed Night, Night 2, and Delayed
Night 2 Ring Assignments

Hardware Requirements

l

Either the T-l Card or DID trunk card is required. Each DID trunk card
provides 8 ports.

l

The DID trunk card requires an external 48V power supply. See

Installation (Section 

300) for instructions.

Considerations

l

The DID Trunk card supports 

 dial-pulse DID.

. The 

 card supports 4-digit, dial-pulse or 

 DID.

l

DID numbers must be between 0000 and 9999.

l

Beginning with CPC-B Version 3.1, a maximum of 500 DID/extension
settings is allowed.

DID Night Ringing Assignment

(CPC-B Version 5.0 or higher)

Description

For a description of this feature, see 

 Flexible Ring Assignments”

on page   18.

DBS-70-700

DBS Manual   Issued 

Page 2-17

Summary of Contents for Section 700


































































































































































































































































































Reviews:

No comments