background image

Chapter 6. SLT Features

Section 700   Operation

2.

Dial the desired extension number.

3.

Upon hearing busy tone, press “5.”

Related Programming

l

 (System): Alert Tone for Busy Override   OHVA

l

 (System): Extension Class of Service Setting 

 and CPC-B

3.1 or higher)

l

FF3 (Extension): Extension Class of Service Assignment 

 and

CPC-B 3.1 or higher)

l

FF3 (Extension): Call 

 (Enable)

Considerations

l

If 

 Transfer is enabled, the held call is transferred as soon as the

extension 

sending the OHVA hangs up.

l

You cannot receive a Call Waiting message during an OHVA.

l

You cannot toggle back and forth between two calls while receiving an
OHVA.

l

If you make an 

 Voice Announcement to an SLT, the SLT user 

and

the other party 

will 

hear the announcement.

Pooled Trunk Access

(All Versions)

Description

The DBS system is designed to accept from 8 to 64 outside lines. These lines
can be divided into seven Pooled Trunk groups. The groups are numbered 9
and 8 l-86.

*Selecting a pooled trunk access number automatically selects a free trunk

from the group.

Operation

1. Lift the handset.

6-30

DBS Manual   lssued 

DBS-70-700

Summary of Contents for Section 700


































































































































































































































































































Reviews: