manualshive.com logo in svg

Panasonic Section 700, Operation, Page: 154 / 289

Share
Download
Panasonic Section 700 Operation Download Page 154

Chapter 4. Key Telephone Features

Section 700   Operation

Do-Not-Disturb 

(DND)

(All Versions)

Description

An extension can be made unavailable by activating Do-Not-Disturb (DND).
When DND is activated at an extension, calls to that extension receive busy
tone.

Operation

 activate DND:

1.

Press the  ON/OFF  key:

l 

The phone issues intercom dial tone.

l 

The  ON/OFF  LED lights:

 

  “ 7 3 . ”

l 

The 

 LED lights.

l 

“DND Set” appears on the display.

3.

Press the ON/OFF key.

The  ON/OFF LED lights.

 cancel DND:

1.

Press the  ON/OFF  key:

l 

The phone issues intercom dial tone.

l 

The  ON/OFF  LED lights.

2.  Dial “73.”

l 

The 

 LED lights.

l 

“DND Canceled” appears on the display.

3.

Press the. ON/OFF key.

The  ON/OFF LED goes off.

4-44

 

 

 

Summary of Contents for Section 700


































































































































































































































































































Reviews:

No comments