manualshive.com logo in svg

Panasonic Section 700, Operation, Page: 44 / 289

Share
Download
Panasonic Section 700 Operation Download Page 44

Section 700   Operation

Chapter 2. System Features

 Stations

(All Versions)

Description

The DBS allows both dial pulse and DTMF extension types.

Related Programming

l

FF2 (Trunk): 

 Dialing for Trunks

Considerations

l

DP to DTMF Signal Conversion allows DTMF extensions to use either
dial pulse or DTMF trunks.

DP to DTMF Signal Conversion

(All Versions)

Description

This feature allows an extension user to switch from DP to DTMF signaling
when using a DP trunk.

For instance, if a user dials into a voice mail system using a DP trunk, the user
can switch to DTMF signaling to communicate with the voice mail system.

DTMF tones can be sent either during the call or while the call is being
dialed.

Operation

To switch from dial pulse to DTMF dialing, press 

 or 

Related Programming

l

FF2 (Trunk): 

 Dialing for ‘Trunks

Considerations

l

DTMF dialing remains in effect for the duration of the call. Pulse dialing is
restored when the handset is replaced.

Summary of Contents for Section 700


































































































































































































































































































Reviews:

No comments