Panasonic Section 700, Operation, Page: 116 / 289

Chapter 4. Key Telephone Features
Section 700 Operation
Auto Redial
and
CPC-B Version 7.0 or higher)
Description
If the Redial key is pressed when the extension is idle or receiving dial tone,
the last intercom or outside number is automatically redialed.
Related Programming
l
FF3 (System): Auto-Redial on Extensions
Barge-In for Direct Lines
and CPC-B Version 5.0 and higher)
Description
Barge-in for Direct Lines allows users to break into a busy Direct Line (DL)
and create a three-party conference.
A direct line is a call appearance used to originate and receive calls over a
specific trunk number.
Operation
To barge into a busy Direct fine, press the lit DL key. (The DL key will be lit
red.)
Related Programming
Barge-in for Direct Lines is controlled by the program settings for Busy
Override. For instance, if an extension with a DL key does not want
broken into, that extension must have “Busy Override Receive” turned off.
Considerations
Paging Groups, Both extensions must belong to the same paging group
7). Paging group 0 does not allow override.
Override Restrictions. Barge-in for Direct Lines cannot override a DL under
the following conditions:
l
When the DL is in a conference call
4-6
DBS Manual Issued
UBS-70-700