Panasonic Section 700, Operation, Page: 252 / 289

Chapter 6. SLT Features
Section
700
Operation
To Cancel an Absence Message
Lift the handset.
2. Dial “7
3. Replace the handset.
Related Programming
l
FFI (System): Extension Class of Service Setting (CPC-AII and CPC-B
Version 3.1 or higher)
l
FF3 (Extension): Extension Class of Service Assignment and
CPC-B Version 3.1 or higher)
l
FF6 (Names and Messages): Absence Messages
Considerations
l
Extensions without displays get a busy signal, rather than the Absence
Message.
l
a message
code
number that has not been assigned a text message is
selected,
“Absence,” followed by the code number, appears on the caller’s
display.
l
Absence Message return times can be entered as shown in Table 6-2:
Table 6-2. Example Return Times for Absence Messages
1035
Return
Four-digit numbers can also be entered (0000-9999 = Hours Minutes or
Month Date).
l
In CPC-A and CPC-B Versions prior to 5.0, and Absence Messages
cancel Call Forwarding.
Beginning with CPC-B Version 5.0, calls to extensions with DND or
Absence Message turned on are treated differently, depending on whether
they are trunk or intercom calls. Intercom calls receive busy tone; trunk
Manual Issued