Chapter 4
Settings — [POSITION] menu
94 - ENGLISH
[2x2]
Performs the adjustment using the pattern of the outer border (there are two lines each vertically and
horizontally as a grid line).
[3x3]
Performs the adjustment using the grid pattern divided into two in the horizontal direction and also in
the vertical direction.
[5x5]
Performs the adjustment using the grid pattern divided into four in the horizontal direction and also in
the vertical direction.
(Factory default setting)
[9x9]
Performs the adjustment using the grid pattern divided into eight in the horizontal direction and also in
the vertical direction.
[17x17]
Performs the adjustment using the grid pattern divided into 16 in the horizontal direction and also in
the vertical direction.
9) Press
as
to select [CONTROL POINTS].
10) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[POINT]
Select this item when adjusting by selecting one intersection from the intersections on the grid lines.
[HORIZONTAL LINE]
Select this item when selecting all the intersections on one horizontal grid line, and adjusting them
simultaneously.
[VERTICAL LINE]
Select this item when selecting all the intersections on one vertical grid line, and adjusting them
simultaneously.
11) Press
as
to select [GRID WIDTH].
12) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[1] - [10]
Select the width of the grid line. It can be set between 1 line to 10 lines.
(Factory default setting: [3])
13) Press
as
to select [GRID COLOR].
14) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[WHITE]
Displays the pattern of the selected color.
(Factory default setting: [RED])
[BLACK]
[RED]
[GREEN]
[BLUE]
[CYAN]
[MAGENTA]
[YELLOW]
[OFF]
Does not display the pattern.
15) Press
as
to select [CONTROL POINTS COLOR].
16) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[WHITE]
Select the color of the marker that indicates the control point.
The marker that indicates the control point is displayed in the control point selection mode and
adjustment mode.
(Factory default setting: [WHITE])
[BLACK]
[RED]
[GREEN]
[BLUE]
[CYAN]
[MAGENTA]
[YELLOW]
17) Press
as
to select [EXECUTE].
