Chapter 4
Settings — [PICTURE] menu
ENGLISH - 87
[DEFAULT PICTURE MODE]
Set the picture mode to be applied when a new signal is input. The setting in the [PICTURE] menu
→
[PICTURE
MODE] will switch according to the setting.
1) Press
as
to select [DEFAULT PICTURE MODE].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[AUTO]
Set [PICTURE MODE] to [GRAPHIC] when a still image signal is input or [STANDARD] when a
moving image signal is input.
[STANDARD]
Set [PICTURE MODE] to [STANDARD].
[CINEMA]
Set [PICTURE MODE] to [CINEMA].
[NATURAL]
Set [PICTURE MODE] to [NATURAL].
[REC709]
Set [PICTURE MODE] to [REC709].
[DICOM SIM.]
Set [PICTURE MODE] to [DICOM SIM.].
[DYNAMIC]
Set [PICTURE MODE] to [DYNAMIC].
[GRAPHIC]
Set [PICTURE MODE] to [GRAPHIC].
Note
f
The following are the conditions where the setting in the [PICTURE] menu
→
[PICTURE MODE] is switched to the picture mode set in
[DEFAULT PICTURE MODE].
g
When a new signal is input
g
When the deleted signal is input again after the registered signal has been deleted
g
When the <DEFAULT> button is pressed while the [PICTURE] menu
→
[PICTURE MODE] is selected
g
When there is no input signal