Panasonic LP-M Series, Operation Manual, Page: 86 / 308

86
2-4-2 Operator Adjustable Items
Select the items to give the permission of setting change in the environment setting screen of “2-16-1 Display Setting
(Environment 1)” (P.225).
Description of Changeable Items
X/Y Offset:
Sets X and Y offset values.
Setting Range
-60.000 to +60.000 mm (LP-M500 / LP-Z130)*
-45.000 to +45.000 mm (LP-S500)*
+Y
-Z
-Y
+X
-X
+Z
Z Offset (LP-M / LP-Z series only) :
Sets Z offset value.
Setting Range
-22.000 to +22.000 mm (LP-M500)*
-25.000 to +25.000 mm (LP-Z130)*
Notice
• The work distance adjusted with the Z-offset setting should conform with the actual distance
from the head base to the marking surface for the proper marking performance.
Laser Power:
Sets the laser power.
Setting Range
12.0 to 100.0 (LP-M500 / LP-S500)*
0.5 to 100.0 (LP-Z130)*
Scan Speed:
Marks value of scan speed.
Setting Range 1 to 12000 mm/s (LP-M500 / LP-S500 / LP-Z130)*
Pulse Cycle (Except LP-SxxxW type):
Sets the laser pulse cycle.
Setting Range
2.0 to 20.0
m
s (LP-M500 / LP-S500)*
10.0 to 50.0
m
s (LP-Z130)*
Line Speed / Line Speed Fine Adjustment (Except LP-SxxxW type) :
Sets the line speed for marking to flying object. Displayed with the setting of the marking to flying object without encoder.
The fine adjustment of the line speed can be set after starting the marking in run mode. Refer to “2-12-2 Marking to
Flying Object” (P.194).
Setting Range
0.060 to 170.000 m/min. (LP-M500 / LP-Z130)*
0.060 to 240.000 m/min. (LP-S500)*
FILE:
Selects file No. Refer to “2-7-2 Change File No.” (P.97) for setting method.
CHARACTER :
Sets character. Refer to “2-8-2 Character Input” (P.104) for setting method.
SAVE:
Overwrites and registers the items changed on operator adjustment screen. Refer to “2-7-3 Save” (P.98).
ENERGY (Marking Energy) (LP-M series and LP-Sxxx type only) :
Sets the warning threshold for the measurement result of the marking energy. Refer to “2-11-2 Marking Energy
Measurement” (P.187) for setting method.
Laser Check :
Radiates the laser to the center of marking field by laser power set. Refer to “Laser Check” (P.87).
* For the setting range of the other model, refer to “Input Setting Value by Series” (P.296).
ME-LPMSZ-OP-7