Panasonic LP-M Series Operation Manual Download Page 139

Page: 139 / 308

139

Description

COPY/PASTE :
Copies and pastes the layer condition.

Size of 3D figure :

The setting items vary with the selected work shape.

For the setting range of the other model, refer to “Input Setting Value by Series” (P.296).

Setting for Plane

Description

Length, Width :

Sets the length and width of the 3D figure.

Setting Range

1.000 to 120.000 mm (LP-M500 / LP-Z130)*

For the setting range of the other model, refer to “Input Setting Value by Series” (P.296).

ABCD

Rotation Angle Z

Rotation
Angle Y

Center
Position
(X, Y, Z)

Rotation
Angle X

Length

Width

Setting items for plane

ME-LPMSZ-OP-7

Summary of Contents for LP-M Series





















































































































































































































































































































Search results

Summary of Contents for LP-M Series

Reviews:

Panasonic LP-M Series, Operation Manual, Page: 139 / 308

Search results

Summary of Contents for LP-M Series

Reviews: