manualshive.com logo in svg

Panasonic LP-M Series, Operation Manual, Page: 106 / 308

Share
Download
Panasonic LP-M Series Operation Manual Download Page 106

106

 

„

Input Method of Symbols

1. 

Press [SYMBOLS].

2. 

Press the symbol to be input directly for input.

The symbol table is changed by pressing [<] [>].
The character is input by pressing [SET].

 

„

When inputting wrong character

1. 

Press [BS] or [DEL] to delete character.

[BS] (Back Space): Deletes one character before the cursor.
[DEL] (DELETE): Deletes one character behind the cursor.

 

„

Input Method of User Registration Character

1. 

Press [REG. CHAR.] (REGISTRATION 
CHARACTER).

2. 

Press the symbol No. to be input directly for input.

The character is input by pressing [SET].

Reference

• 

It needs to register the font created by the user into the user registration font and, also register to laser marker. Refer to 
“2-15-4 Font File” (P.217).

• 

The following characters are registered as the user registration font “U1” to “U9” as the factory settings:

• 

On the button of U1 to U50 in the user registration character input screen, the registered character images are displayed 
together.

ME-LPMSZ-OP-7

Summary of Contents for LP-M Series





















































































































































































































































































































Reviews:

No comments