manualshive.com logo in svg

Panasonic LP-M Series, Operation Manual, Page: 283 / 308

Share
Download
Panasonic LP-M Series Operation Manual Download Page 283

283

GS1 DataBar Stacked Omnidirectional

GS1 DataBar Stacked Omnidirectional is the two-tiered symbol consisting of halves of standard GS1 DataBar divided into 
two. The three-tiered separator of one module high or more is inserted between tiers. The minimum value of bar code 
height is 69 times as high as the module width.

Content of code data

• 

On GS1 DataBar bar code, one-digit package indicator is added before the 13-digit common product code “EAN”. The 
14-digit product code is called as “GTIN (Global Trade Item Number)”.

• 

It can indicate numerical characters (0 to 9).

•  The data consists of application identifier “01” and 13-figure numerical characters.
•  The application identifier indicates the content of data and automatically added.

ME-LPMSZ-OP-7

Summary of Contents for LP-M Series





















































































































































































































































































































Reviews:

No comments