Panasonic LP-M Series Operation Manual Download Page 51

Page: 51 / 308

1-3-8 Mark to Flying Object

Reference

•

No marking functions for mobile devices are implemented to LP-SxxxW type.

Sample

1826

Sensor

The following shows the procedure for marking to flying object.

The detail is described in “2. Set the status of the laser marker into ready for receiving trigger.” (P.54).

The detail is described in “1. Set the conditions of the on-the-fly marking.” (P.52).

Refer to “1-2-3 Set the marking data” (P.17).

3. Set the status of the laser marker into ready for receiving trigger.

Set the conditions of the on-the-fly marking.

1. Input character and set the marking conditions.

Reference

•

For details on marking on moving object, refer to “2-12-2 Marking to Flying Object” (P.194).

ME-LPMSZ-OP-7

Summary of Contents for LP-M Series





















































































































































































































































































































Search results

Summary of Contents for LP-M Series

Reviews:

Panasonic LP-M Series, Operation Manual, Page: 51 / 308

Search results

Summary of Contents for LP-M Series

Reviews: