Panasonic LP-M Series, Operation Manual, Page: 163 / 308

163
Description
8 Auto :
This function button sub serves the code configuration By inputting the “Module Width” and “Bar Code Data”,
this function is available. Pressing AUTO button displays the confirmation dialog box. On this screen, clicking
“Yes” sets both the bar code condition and laser condition automatically, and clicking “No” sets only the bar code
condition automatically. This AUTO setting becomes invalid by pressing “Cancel”.
Refer to “Setting Value for AUTO Set” (P.292) for detail.
9 Separator Height/(W) :
Specifies the height of the separator between a multi-tiered bar code. Usually it is the same as the width of a
module.
Setting Range 0.0 to 10.0
10 Symbol Character in Row (GS1 DataBar Expanded Stacked only) :
Specifies the number of column for overlapping the bar code.
Setting Range 2 to 20 (For primary composite : 4 to 20.)
* For the setting range of the other model, refer to “Input Setting Value by Series” (P.296).
Reference
• For GS1 DataBar, GS1 DataBar Limited and those composite codes, input 13-figure numbers as the code data. In those
human readable text, “01” as AI in the head of the text and the check digit (modulus10/weight 3-1) in the end of the text
are indicated automatically.
ME-LPMSZ-OP-7