manualshive.com logo in svg

Panasonic LP-M Series, Operation Manual, Page: 119 / 308

Share
Download
Panasonic LP-M Series Operation Manual Download Page 119

119

Setting Sample

1.  In the case of setting the expiry date after 1 month (today included/today not included):

In the case of the setting pattern above (1 month after), the date to be marked as follows:

Today

Marking Result

Today included

Today not included

January 1st

February 1st

January 31st

January 31st

March 1st

February 28th

*(February 29th)

February 1st

March 1st

February 28th

*(February 29th)

February 28th

March 28th

March 27th

March 1st

April 1st

March 31st

March 31st

May 1st

April 30th

April 1st

May 1st

April 30th

April 30th

May 30th

May 29th

May 1st

June 1st

May 31st

May 31st

July 1st

June 30th

June 1st

July 1st

June 30th

June 30th

July 30th

July 29th

Today

Marking Result

Today included

Today not included

July 1st

August 1st

July 31st

July 31st

August 31st

August 30th

August 1st

September 1st

August 31st

August 31st

October 1st

September 30th

September 1st

October 1st

September 30th

September 30th October 30th

October 29th

October 1st

November 1st

October 31st

October 31st

December 1st

November 30th

November 1st

December 1st

November 30th

November 30th December 30th

December 29th

December 1st

January 1st

December 31st

December 31st

January 31st

January 30th

* 

The dates in parentheses are used in the case of leap years.

2.  In the case of setting the expiry date after 1 year and 3 months (setting to 12 3 months = after 15 months):

When the date of today is “January 1st” with the above setting pattern, the date to be marked is “April 1st”.

3.  In the case of setting the expiry date after 1 month and 15 days (setting to 30 days + 15 days = after 45 days):

When the date of today is “January 1st” with the above setting pattern, the date to be marked is “February 15th”.

Notice

• 

The following items, Date, Lot, and Expiry date are marked based on the internal clock of the laser marker. The internal 
clock might be deviated due to the error in internal part or battery drain. Therefore, be sure to check the time of the 
internal clock before the operation.

ME-LPMSZ-OP-7

Summary of Contents for LP-M Series





















































































































































































































































































































Reviews:

No comments