Panasonic LP-M Series Operation Manual Download Page 45 | Manualshive

Page: 45 / 308

Panasonic LP-M Series Operation Manual Download Page 45

45

1. Select the logo data.

1.

Press [CONDITION] and press [LOGO].

2.

Select the logo No. 00, and then press [SET].
The logo No. is available to set from 0 to 99.

3.

Press [Logo File].

4.

Select the logo file from the list and press [SET].

Reference

• The logo file created newly is required to register into the laser marker. Refer to “2-15 USB Media” (P.214) and “Logo Data

Conversion Software Operation Manual”.

• As for the following file format data, BMP, DXF, JPEG, and HPGL, and art work made by Adobe

®

Illustrator

®

convert

these data into the appropriate file format data using logo data conversion software or ExportVec, and then register the
data into the laser marker. (DXF files are not required to be converted.) Refer to the “Logo Data Conversion Software

Operation Manual”, “ExportVec Operation Manual” for details.

ME-LPMSZ-OP-7

«
...
43
44
45
46
47
...
»

Summary of Contents for LP-M Series





















































































































































































































































































































Reviews:

No comments