Useful Information
Answering System
Preparation
87
Troubleshooting
For assistance, please call: 1-800-211-PANA(7262)
T
e
lephone System
The handset does not display
the caller’s name and/or
phone number.
•
You need to subscribe to Caller ID.
•
Other telephone equipment may be
interfering with your phone. Disconnect it and
try again.
•
Other electrical appliances connected to the
same outlet may be interfering with Caller ID.
•
Telephone line noise may be affecting Caller
ID.
•
The caller requested not to send his/her
Caller ID information. See page 32.
•
If a call is being transferred to you, the Caller
ID information will not be displayed.
•
If a (separate) Caller ID box is connected
between the unit and the telephone wall jack,
disconnect the Caller ID box or plug the unit
directly into the wall jack.
The handset display exits the
Caller List or phone book.
•
Do not pause for over 60 seconds while
searching.
You cannot redial.
•
If the last number dialed was more than 48
digits long, the number will not be redialed
correctly.
•
The
[REDIAL/PAUSE]
button on the base
unit functions as either redial or pause. It will
redial the last number dialed if pressed
before dialing any digits (p. 30). If another
number has been dialed first, it will operate
as a pause button (p. 55).
“
” is not displayed
properly.
•
The line mode selection is incorrect. Set line
mode to “A” (p. 19).
Problem
Cause & Remedy
IN USE
