Programmable Settings
22
Base unit ringer tone
(use either the handset or the base unit)
Make sure the base unit is not being used.
Selecting the base unit ringer tone by using the
LCD Contrast
There are 6 levels of LCD contrast. The factory preset is level 3.
1
Press
[
H
]
or
[
G
]
.
•
The base unit will ring at the current ringer tone.
2
Within 30 seconds, select the desired ringer
tone
by pressing
[
H
]
or
[
G
]
.
•
The base unit will ring and the ringer tone will change.
•
You can also select the ringer tone by pressing
[1]
to
[7]
.
1
Press
[MENU]
.
2
Scroll to “
Initial setting
” by pressing
[
d
]
or
[
B
]
, then press the
soft key (
).
3
Scroll to “
Set base unit
” by pressing
[
d
]
or
[
B
]
, then press the
soft key (
).
4
Follow steps 4 and 5 of “Handset ringer tone” on page 21.
•
When selecting the ringer tone, the base unit will ring. If the base unit ringer
volume has been set to OFF (p. 21), the base unit will not ring.
1
Press
[MENU]
.
2
Scroll to “
Initial setting
” by pressing
[
d
]
or
[
B
]
, then press the soft key (
).
3
Scroll to “
LCD contrast
” by pressing
[
d
]
or
[
B
]
, then press the soft key (
).
4
Select the desired contrast by pressing
[
d
]
or
[
B
]
.
•
The contrast will change.
•
The number of steps indicates the contrast level.
5
Press the soft key (
), then press
[OFF]
.
Base Unit
Handset
SELECT
SELECT
Handset
SELECT
Initial setting
SELECT
LCD contrast
LCD contrast
Low
High
Ex. Level 3
SAVE
