Installation
14
Recharge
Recharge the battery when:
— “
Recharge battery
” is displayed on the handset,
— “
3
” flashes, or
— the handset beeps intermittently while it is in use.
•
If you DO NOT recharge the battery for more than 15 minutes, the display will
continually indicate “
Recharge battery
” and/or “
3
” will flash when the
handset is lifted off the base unit.
•
If the battery has been discharged, the handset will display “
Charge for 6 HRS
”
and “
4
” when you place the handset on the base unit. The handset will not
work unless the battery is charged. Keep charging.
A nickel metal hydride battery that is recyclable powers the product
you have purchased. Please call 1-800-8-BATTERY for
information on how to recycle this battery
.
Battery information
After your Panasonic battery is fully charged, you can expect the following
performance:
•
Battery operating time may be shortened depending on usage conditions and
ambient temperature.
• Clean the charge contacts of the handset and the base unit with a soft, dry
cloth once a month. Clean more often if the unit is subject to grease, dust or
high humidity.
Otherwise the battery may not charge properly.
•
If the battery is fully charged, you do not have to place the handset on the base
unit until “
Recharge battery
” is displayed and/or “
3
” flashes. This will
maximize the battery life.
•
The battery cannot be overcharged.
Battery replacement
:
After recharging the battery, if after a few telephone calls:
— “
Recharge battery
” is displayed or “
3
” flashes, or
— “
Charge for 6 HRS
” and “
4
” are displayed.
Clean the charge contacts. If the battery still does not hold its charge, the battery
needs to be replaced. Please order a new Panasonic HHR-P104 battery at the
telephone number shown on page 2. To replace the battery, see page 13.
Operation
Operating time
While in use (TALK)
Up to 5 hours
While not in use (Standby)
Up to 11 days
While using the Clarity Booster feature (p. 29)
Up to 3 hours
SP
I
PRIVACY
3
Recharge battery
IN USE
[1]