Useful Information
Answering System
T
e
lephone System
15
For assistance, please call: 1-800-211-PANA(7262)
Preparation
Programmable Settings
Programming Guidelines
The unit has several programmable functions which can be selected from the
function menu on the display (p. 16).
How to select a function item from the menu
•
To go back to the previous menu, press the soft key (
), or press the soft key
(
) while “
---(Go back)----
” is displayed. If you press this key in the main
menu, the unit will exit programming mode.
•
After programming is complete, the display will return to the main menu or the
sub-menu depending on which menu the selected item is located. (See the menu
table on page 16.)
•
You can exit programming mode at any time by pressing
[OFF]
.
•
If you do not press any buttons for 60 seconds, the unit will exit programming mode.
•
If the unit detects a problem, an error message will be displayed (p. 83–85).
Make sure the handset and the base unit are not being used. The handset
must be operated near the base unit and while off the base unit.
1
Press
[MENU]
.
•
The main menu is displayed (p. 16).
2
Scroll to the desired item by pressing
[
d
]
or
[
B
]
.
3
Press the soft key (
) to select the desired item.
4
If the item has a sub-menu, select the menu item (p. 16).
Repeat steps 2 and 3 until the desired item is displayed.
5
Select the desired setting by pressing
[
d
]
or
[
B
]
, then press the soft key (
).
•
A confirmation tone will be heard and the setting
will be saved.
6
Press
[OFF]
to exit programming mode.
Handset
SAVE
[OFF]
exits
programming.
Navigator key scrolls
through the menu.
[MENU]
enters the
function menu.
The soft key works as
the or key.
The soft key works
as the key.
BACK
SAVE
SAVE
BACK
BACK
SAVE
SELECT
B
Ringer setting
d
BACK
P LAY
SELECT
SELECT
SAVE
d
B
BACK
P LAY
SAVE
BACK
SELECT
