manualshive.com logo in svg

Panasonic KXTG5243 - KXTG5240M TOT 3 H/S, Operating Instructions Manual, Page: 66 / 104

Share
Download
Panasonic KXTG5243 - KXTG5240M TOT 3 H/S Operating Instructions Manual Download Page 66

66

Listening to Messages

You can see the total number of recorded 
messages on the base unit display. If the 
ANSWER ON indicator flashes, new messages 
have been recorded. The mailbox icons (

, 

and 

) which have new messages 

also flash on the base unit display. 

•

If only old messages exist in a mailbox, the 
mailbox icon will be displayed but will not flash.

•

If the Message Alert is turned on (p. 26), the Ringer indicator on the handset will 
flash when new messages have been recorded.

Using the Base Unit

To play back messages

Press the MAILBOX button (

[MAILBOX 1]

,

[MAILBOX 2]

 or 

[MAILBOX 3]

).

•

The unit announces “

Mailbox (No.)

” and the number of new messages in the 

mailbox, and plays back the new messages.

•

If the mailbox also contains old messages, only new messages will be played 
back.

• When the mailbox has no new messages

, the unit announces “

Mailbox (No.)

”

and “

No new messages. All message playback

”, and plays back all messages in the 

mailbox.

When Mailbox 2 or 3 has a password

1. Press 

[MAILBOX 2]

 or 

[MAILBOX 3]

.

•

“

Enter Mailbox password

” will be heard.

2. Enter the Mailbox password (p. 64).

•

The unit announces “

Mailbox (No.)

” and the number of new messages in the 

mailbox, and plays back the new messages. If there are no new messages, all 
messages in the mailbox will be played back.

•

During playback, the display shows the mailbox number and message number. 

•

At the end of the last message of the mailbox, 

“End of final message

” is heard. The 

unit will announce the remaining recording time if it is less than 3 minutes.

•

When the mailbox has no messages, the unit announces “

Mailbox (No.)

” and “

No

messages

”.

•

If a call is received during playback, the unit rings and playback stops. To answer 
the call, press 

[SP-PHONE]

. For playback, start again from the beginning after 

hanging up.

Voice Day/Time Stamp:

 During playback, the unit will announce the day and 

time when each message was recorded (p. 17).

BOX

BOX

3

BOX

BOX

1

BOX

BOX

2

Ex. Mailbox 1 has new messages; 

Mailbox 2 has old messages; 
Mailbox 3 has no messages.

BOX 1

BOX 2

BOX 3

Base Unit

BOX

BOX

2

Ex. Mailbox 2

Summary of Contents for KXTG5243 - KXTG5240M TOT 3 H/S









































































































Reviews:

No comments