Useful Information
Answering System
Preparation
37
Using the Caller List
For assistance, please call: 1-800-211-PANA(7262)
T
e
lephone System
Caller ID Number Auto Edit
This unit can automatically edit incoming phone numbers. For example, it can
ignore the area code of calls originating from your area code, so that you can call
these numbers from the Caller List without dialing the area code.
To activate this feature, you must edit a caller’s phone number in the Caller List
(p. 36) by selecting pattern
F
,
G
, or
H
, then make an outgoing call to that number.
Calls from numbers in that area code will be edited automatically. The unit can
remember up to 4 area codes to be edited according to patterns
F
and
G
.
You can turn on and off this feature using the handset. The factory preset is ON.
To turn this feature ON/OFF
•
If you fail to reach your destination when making a call, the phone number you
dialed might have an incorrect pattern. Edit the phone number with another
pattern (p. 36).
•
When this feature is set to OFF the unit will still be able to display Caller ID, but
incoming Caller ID numbers will not be automatically edited.
•
If you move to another area you may need to turn this feature off to erase the
previously edited area codes. To use this feature again, turn it on and reprogram
the area codes you want to be edited once again.
1
Press
[MENU]
.
2
Scroll to “
Initial setting
” by pressing
[
d
]
or
[
B
]
, then press the soft key (
).
3
Scroll to “
Caller ID edit
” by pressing
[
d
]
or
[
B
]
, then press the soft key (
).
4
Select “
Off
” or “
On
” by pressing
[
d
]
or
[
B
]
.
5
Press the soft key (
), then press
[OFF]
.
Handset
SELECT
Initial setting
SELECT
Caller ID edit
Auto edit
:On
SAVE
