Useful Information
Answering System
Preparation
31
Answering Calls
For assistance, please call: 1-800-211-PANA(7262)
T
e
lephone System
To put a call on hold
Press
[HOLD]
during a conversation.
•
The SP-PHONE indicator flashes.
To return to the call
, press
[SP-PHONE]
.
•
Handset users can take the call by pressing
[
C
]
or
[
s
]
.
•
If another phone is connected on the same line (p. 12), you can also take the call
by lifting its handset.
•
If a call is kept on hold for 6 minutes, an alarm tone will start to sound and the
Ringer indicator on the handset will start to flash rapidly. After 4 additional minutes
on hold the call will be disconnected.
Answering Calls
When a call is received, the unit rings, “
Incoming call
” is displayed on the
handset, and the Ringer indicator and the IN USE indicator flash rapidly.
1
Press
[
C
]
or
[
s
]
.
•
You can also answer a call by pressing any
button except
[
d
]
,
[
B
]
and
[OFF]
.
2
To hang up, press
[OFF]
or place the
handset on the base unit.
Auto Talk
If you set the Auto Talk feature to ON (p. 19), you can
answer a call by lifting the handset off the base unit or
the charger (for accessory handset users, p. 3).
1
Press
[SP-PHONE]
.
2
Talk into the
MIC
.
3
To hang up, press
[SP-PHONE]
.
• To transfer the call to the base unit or handset, see page 49.
• To transfer the call to a mailbox to allow the caller to leave a message,
see page 70.
•
When the ringer volume is set to OFF, the unit will not ring (p. 20, 21).
Handset
[ ]
[ ]
[OFF]
Ringer
Indicator
Base Unit
MIC
[SP-PHONE]
and Indicator
IN USE
Indicator
