Panasonic KX-NS1000, Feature Manual

Page: 451 / 482

5.1.10 DISA (Direct Inward System Access)
Operating Manual References
1.3.74 Walking COS
22.1.2 Walking Extension
Description
It is possible for an extension user to trade extension settings with another extension.
When Walking Extension is executed, all extension settings (extension number, Class of Service (COS),
One-touch Dialing memory, etc.) of the "old" extension are exchanged with the "new" extension.
This feature is useful when an extension user moves desks, or when an extension user has no permanent
desk.
This feature is also known as Walking Station.
Conditions
•
This feature allows extension settings to be switched between PTs and SLTs. Moving between tenants is
also possible.
•
Incoming calls to your extension will reach you at your new location.
•
An extension personal identification number (PIN) is required to use this feature. (
®
6.1.10 Extension PIN
(Personal Identification Number))
•
If a DSS Console is connected to a PT and the DSS Console is continuously used with the PT after Walking
Extension has been activated, the new extension number of the PT must be assigned as the paired
extension through system programming.
•
If the Walking Extension feature is performed at the same time that the target extension is being
programmed by PC, the Walking Extension feature may not work properly. (
®
15.1.3 PC Programming)
•
If this feature is performed using an extension with a Bluetooth wireless headset connected, the Bluetooth
device cannot be used with the new extension. To use the Bluetooth wireless headset, register it to the
new extension.
•
This feature is not available for SIP extensions.
PC Programming Manual References
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features— Walking Extension
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Main— Extension
PIN
Operating Manual References
1.3.75 Walking Extension
22.1.3 Walking Extension, Enhanced
Description
It is possible to use the Walking Extension feature with extensions in Service-in (functions normally) and
Service-out (cannot make CO line calls or receive calls) modes, allowing extensions and locations (i.e.,
Document Version 2016-03 Feature Manual 451
22.1.3 Walking Extension, Enhanced