Panasonic KX-NS1000, Feature Manual

Page: 428 / 482

Conditions
•
In order to use the FWD to CO option, the ability to forward calls to CO lines must be enabled through
system programming.
•
Extensions assigned as operators can be called by dialing [0], however, when setting this feature the
extension number (not "0") must be specified.
PC Programming Manual References
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Remote Call/Automatic Login/Direct Service
21.1 UM Configuration—[2] Class of Service
Operating Manual References
Subscriber Operation
1.6.5 Transferring Calls— Remote Call Forwarding
Manager Operation
2.2.1 System Manager Features— Setting Class of Service (COS) Parameters
2.2.2 Message Manager Features— Remote Call Forwarding Set
20.1.76 Unified Messaging—Remote Time Service Set
Description
Allows the System Manager to program his or her extension from a remote location in order to change the
PBX's time service mode (day/night/lunch/break).
Operating Manual References
Manager Operation
2.2.1 System Manager Features— Remote Time Service Mode Setting
20.1.77 Unified Messaging—Send to Fax Machine
Description
Through the voice mail guidance, a subscriber can send received faxes to another destination. This feature
can be used to send received faxes to a fax machine to print them out.
The subscriber can send faxes to the following destinations:
•
A preprogrammed fax machine
•
A fax machine specified by entering its number via the telephone
•
The fax machine the subscriber is calling from (if calling from a fax machine)
The subscriber can select which faxes are sent, as follows:
•
The current fax being "listened" to
•
All unprinted faxes
•
All faxes
428 Feature Manual Document Version 2016-03
20.1.77 Unified Messaging—Send to Fax Machine