1-3
Installation Method
Before installing each device, read carefully the explanation of the setting
environment, concern about noise and radiation, and power supply.
(
Refer to
“Introduction”
–
“Correct Handling”
.)
Fix the sensor head securely with M4 screws inserted into the two screw holes of
the sensor head.
•
The tightening torque should be 0.8N·m or less.
•
Never impose force around the connectors of the sensor head cable and extension
cable. Do not bend the cables near the connectors. Doing so may result in cable
disconnection.
•
Pay utmost attention not to bend the sensor cable in excess if the sensor needs to
be moved.
Extension Cable
•
Do not pull the cable with a force of
29.4N or over when wiring the cable
when the sensor head is fixed. The
cable may be bent with a radius of 30
mm or over. However, do not bend the
cable within 20 mm of the sensor head.
20 mm min.
R 30 mm min.
Ramco National
800-280-6933 | [email protected]
www.panasonicsensors.com
Summary of Contents for HL-G1-A-C5 Series
Page 18: ...Ramco National 800 280 6933 nsales ramcoi com www panasonicsensors com...
Page 98: ...Ramco National 800 280 6933 nsales ramcoi com www panasonicsensors com...
Page 130: ...Ramco National 800 280 6933 nsales ramcoi com www panasonicsensors com...
Page 157: ...Ramco National 800 280 6933 nsales ramcoi com www panasonicsensors com...
