- 52 -
Iris value:
CLOSE
!#
(F11 to F1.9)
!#
OPEN
≥
Value closer to CLOSE darken the image.
≥
Value closer to OPEN brighten the image.
≥
To return to Auto Iris Mode, press the IRIS button, or set this unit to Intelligent Auto Mode using
the iA/MANU switch.
≥
It is not possible to adjust the iris in the following situations:
j
When a setting in [SCENE MODE] is enabled (
)
j
During Freeze Frame (
≥
Depending on the zoom magnification, there are iris values that are not displayed.
≥
In Auto Gain Mode or Auto Shutter Mode, the screen brightness may not change even if you
adjust the iris. (
∫
To enable Backlight Compensation
If you enable [BACKLIGHT COMPENS.] in Auto Iris Mode, automatic iris control will be activated for
backlight compensation, brightening the screen image by preventing subjects from appearing dark
when there is a light source behind them.
Select the menu. (
)
≥
appears when it is set.
≥
It will return to standard Auto Iris Mode (
) when it is canceled. (
)
≥
You can also change the setting using the USER button to which [BACKLIGHT] is registered
(
This function is registered to the USER2 button by default.
≥
This function is not available in the following cases:
j
When [SCENE MODE] is set to [Fireworks] (
)
j
During Freeze Frame (
j
Backlight Compensation is canceled when you turn off this unit.
: [CAMERA SETUP]
#
[BACKLIGHT COMPENS.]
#
[ON]
MENU
HC-PV100_GC_GW_SQW0750-1_mst.book 52 ページ ２０１８年１１月１６日 金曜日 午後５時１４分
