Panasonic HC-PV100 Operating Instructions Manual Download

Page: 142 / 160

- 142 -

Major confirmation/error messages to be indicated on the screen in text.

Display

Messages

During recording/playback

Display

Description

Behavior and cause

CHECK CARD.

The SD card is not supported by this
unit.

≥

Check the SD card.

THIS CARD CANNOT
RECORD IN VIDEO
MODE.

This is displayed when the SD card
has a capacity of less than 4 GB.

≥

Use an SD card with a
capacity of 4 GB or more.

INCOMPATIBLE CARD.
CHECK CARD SPEED.

This is displayed if the maximum
writing speed of the SD card is not
fast enough.

≥

The operation will
continue.

≥

Use an SD card with a
maximum writing speed
that is fast enough.

CANNOT BE USED DUE
TO INCOMPATIBLE
DATA.

The SD card cannot be used with
this unit.

≥

Insert a recordable SD
card.

CANNOT RECORD
- INCOMPATIBLE
CONTROL DATA.

The content versions do not match.
This is displayed when the SD card
contains scenes recorded with
another device, for example.

≥

Match the device and
content version.

ERROR OCCURRED.
RECORDING IS
STOPPED.

This is displayed when the SD card
is removed during recording or data
cannot be written to the SD card
correctly.

≥

Check the SD card.

CANNOT RECORD.THE
NUMBER OF SCENES
HAS EXCEEDED THE
MAXIMUM LIMIT.

No additional scenes can be
recorded to the SD card.

≥

Delete unnecessary
scenes, or use a new SD
card.

CANNOT RECORD
- DATE CAPACITY IS
FULL.

Cannot record
- Playlist capacity is full.

This is displayed when you try to
record in excess of the maximum
number of scenes allowed for one
SD card.

≥

The operation will stop.

≥

Replace the SD card or
delete unnecessary
scenes.

INVALID

This is displayed when the operation
is invalid.

≥

Before performing the
operation, wait until this
unit is ready for it.

HC-PV100_GC_GW_SQW0750-1_mst.book 142 ページ２０１８年１１月１６日　金曜日　午後５時１４分

Summary of Contents for HC-PV100

































































































































































Search results

Summary of Contents for HC-PV100

Reviews:

Related manuals for HC-PV100

Brands by name

Popular brands

Panasonic HC-PV100, Operating Instructions Manual

Search results

Summary of Contents for HC-PV100

Reviews:

Related manuals for HC-PV100

Brands by name

Popular brands