- 114 -
If you set this item to [ON], you can compensate for and reduce flash band, a phenomenon that
creates markedly different levels of luminance between the top and bottom of the image when
recording is performed in an environment where another camera is firing its flash. (
)
≥
Switch to Manual Mode. (
You can control the noise reduction effect and afterimage intensity by adjusting the noise reduction
setting.
1
Touch [NR CONTROL].
2
Touch
/
to adjust settings.
≥
You can select a value between
s
5 and
r
5.
≥
Adjusting the setting in the minus (
s
) direction weakens the noise reduction effect, thereby
reducing afterimages. Note that this also tends to increase noise.
≥
Adjusting the setting in the plus (
r
) direction enhances the noise reduction effect, thereby
reducing noise. Note that this may also cause afterimages to appear more frequently.
3
Touch [EXIT] to exit the menu screen.
≥
The default setting is 0.
[FLASH BAND COMPENSATION]
[ON]/[OFF]
[NR CONTROL]
HC-PV100_GC_GW_SQW0750-1_mst.book 114 ページ ２０１８年１１月１６日 金曜日 午後５時１４分
