- 99 -
When this device and a computer for editing are connected using a USB 2.0 Cable (commercially-
available), image data in the SD card can be transferred.
≥
This unit supports USB 2.0.
≥
Concerning non-linear editing, refer to the instruction manual of your editing software.
≥
Final Cut Pro can be used if you have a Mac computer. (For details on Final Cut Pro, contact
Apple.)
≥
It is impossible to write data to the SD card on this unit from a PC.
Operating environment (mass storage)
≥
Even if the system requirements mentioned in these operating instructions are fulfilled, some PCs
cannot be used.
≥
The USB equipment operates with the driver installed as standard in the OS.
∫
If using Windows
≥
Operation is not guaranteed in the following cases.
j
Operation on an upgraded OS.
j
Operation on an OS other than the one pre-installed.
∫
If using Mac
Connecting to a PC
(File transfer/nonlinear editing)
OS
Windows 10 (32 bit/64 bit)
Windows 8.1 (32 bit/64 bit)
Windows 7 (32 bit/64 bit) SP1
CPU
1 GHz or higher
32-bit (
k
86) or 64-bit (
k
64) processor
RAM
2 GB or more (64 bit)/1 GB or more (32 bit)
Interface
USB port
Other requirements
Mouse or equivalent pointing device
PC
Mac
OS
OS X v10.11
CPU
Intel Core 2 Duo or better
RAM
2 GB or more
Interface
USB port
Other requirements
Mouse or equivalent pointing device
HC-PV100_GC_GW_SQW0750-1_mst.book 99 ページ ２０１８年１１月１６日 金曜日 午後５時１４分
