Panasonic HC-PV100 Operating Instructions Manual Download

Page: 88 / 160

- 88 -

Repeat Playback

Playback of the first scene starts after playback of the last scene finishes.

Select the menu.

The

indication appears on the full screen views.

≥

All the scenes displayed in the thumbnail will be repeatedly played back.

≥

Repeat Playback cannot be used for the slide show playback of the still pictures. (

)

Resuming the previous playback

If playback of a scene was stopped halfway, the playback can be resumed from where it was
stopped.

Select the menu.

If playback of a motion picture is stopped,

appears on the thumbnail view of the stopped

scene.

≥

The memorized resume position is canceled if you turn off the unit or press the THUMBNAIL
button. (The setting of [RESUME PLAY] does not change.)

: [VIDEO SETUP]

[REPEAT PLAY]

[ON]

: [VIDEO SETUP]

[RESUME PLAY]

[ON]

HC-PV100_GC_GW_SQW0750-1_mst.book 88 ページ２０１８年１１月１６日　金曜日　午後５時１４分

Summary of Contents for HC-PV100

































































































































































Search results

Summary of Contents for HC-PV100

Reviews:

Related manuals for HC-PV100

Brands by name

Popular brands

Panasonic HC-PV100, Operating Instructions Manual

Search results

Summary of Contents for HC-PV100

Reviews:

Related manuals for HC-PV100

Brands by name

Popular brands