Panasonic HC-PV100, Operating Instructions Manual

Page: 135 / 160

- 135 -
When about 5 minutes have passed without any operation, this unit automatically turns off to save
battery life.
≥ This unit will not automatically turn off even if the [ECONOMY (BATT)] is set to [ON] in following
cases:
j PRE-REC is used ( l 72 , 124 )
j
When [USB MODE SELECT] is set to [DEVICE] and this unit is connected to a PC. (
l
100 )
When connected to AC adaptor about 15 minutes have passed without any operation, this unit
automatically turns off.
≥
This unit will not automatically turn off even if the [ECONOMY (AC)] is set to [ON] in following
cases:
j
PRE-REC is used (
l
72 , 124 )
j When [USB MODE SELECT] is set to [DEVICE] and this unit is connected to a PC. ( l 100 )
The unit’s USB terminal to which a USB Cable will be connected can be switched.
Switch the terminal according to the shape of the USB Cable’s plug you intend to connect to the
unit.
The menu settings is reset to the default.
* Settings for [CLOCK SET] and [TIME ZONE] will not be changed.
≥ Returning all settings to the default is not possible during Freeze Frame. ( l 68 )
Set the file number of the MOV/MP4 and still picture recorded next to 0001.
≥ Folder number is updated and file number will start from 0001. ( l 101 )
≥
To reset the folder number, format the SD card, and then perform [NUMBER RESET].
[ECONOMY (BATT)]
[ON]/[OFF]
[ECONOMY (AC)]
[ON]/[OFF]
[USB MODE SELECT]
[HOST]: For connecting to the USB HOST terminal (Type A) of the unit
[DEVICE]: For connecting to the USB DEVICE terminal (Type Micro-B) of the unit
[INITIAL SET]
[YES]: This is for initializing all menus.
*
[NO]: This is for not performing initialization.
[NUMBER RESET]
HC-PV100_GC_GW_SQW0750-1_mst.book 135 ページ ２０１８年１１月１６日 金曜日 午後５時１４分