Panasonic HC-PV100, Operating Instructions Manual

Page: 67 / 160

- 67 -
≥ Register “Histogram” to a USER button. ( l 62 )
A graph with brightness as horizontal axis and number of pixels at that brightness as vertical axis is
displayed. It is possible to determine the exposure of the whole image by looking at the distribution
in the graph.
∫
To move a histogram
You can move a histogram by touching and holding the
histogram display
A
. Slide the display while touching it to
move it to the desired display location.
≥
This item cannot be set during Freeze Frame. (
l
68 )
≥ To adjust the brightness, refer to page 51 .
≥ Register “Recording Check” to a USER button. ( l 62 )
Approximately 2 seconds at the end of the video recorded last can be played back. It will return to
recording screen once the playback is completed.
≥
Playback operation is not possible during the Recording Check.
≥ Recording Check is not possible in following cases:
j
When the unit is turned on/off
j When the THUMBNAIL button is pressed
j
When the SD card is inserted/removed
j When the setting of [REC FORMAT] is changed ( l 115 )
j
Set [2 SLOTS FUNC.] to [SIMULTANEOUS]. (
l
122 )
j PRE-REC is used ( l 72 , 124 )
j
During the Interval Recording (
l
123 )
j During Freeze Frame ( l 68 )
≥ Register “Last Scene Delete” to a USER button. ( l 62 )
The motion picture recorded last can be deleted.
Deleted scenes cannot be restored.
1 Press USER button or touch USER button icon in the recording screen.
2 Touch [YES].
≥
It will return to recording screen without deleting by touching [NO].
≥ Last Scene Delete is not possible in following cases:
j
When the unit is turned on/off
j When the THUMBNAIL button is pressed
j
When the SD card is inserted/removed
j When the setting of [REC FORMAT] is changed ( l 115 )
j
Set [2 SLOTS FUNC.] to [SIMULTANEOUS]. (
l
122 )
j During the Interval Recording ( l 123 )
Histogram
Recording Check
Last Scene Delete

HC-PV100_GC_GW_SQW0750-1_mst.book 67 ページ ２０１８年１１月１６日 金曜日 午後５時１４分