Panasonic HC-PV100, Operating Instructions Manual

Page: 60 / 160

- 60 -
You can change a counter display that indicates how much time has elapsed during recording or
playback.
1
Touch the LCD monitor while the recording
screen is displayed.
≥ Operation icons will be displayed.
2
Touch to switch the counter display.
≥
The display will be switched in the following order:
Time Code
#
Recording Counter
#
Off
Setting the Time Code
Time code will display the recording time in hours, minutes, seconds, and frames.
TC 00:00:00:00 (hour : minute : second : frame)
Sets the way the time code will move.
Select the menu.
≥
[FREE RUN] is automatically selected during PRE-REC. ( l 72 , 124 )
≥ It is automatically set to [REC RUN] in following cases:
j
During Super Slow Recording ( l 73 )
j During the Interval Recording ( l 123 )
Recording
Counter display
Counter display Indications
Time Code TC 00:00:00:00
Recording Counter ( l 61 ) (In Recording Mode)
0:00:00 or SCN 0:00:00
(In Playback Mode)
SCN 0:00:00
≥
In Recording Mode, display will change depending on the
setting of the [REC COUNTER].
≥
In Playback Mode, display will return to SCN 0:00:00 for
each scene.
Frame rates in [REC FORMAT] Frame
50.00p/50.00i/25.00p 0 to 24
[TCG]
: [RECORD SETUP]
#
[TCG]
#
desired setting
[FREE RUN]: It will constantly move.
[REC RUN]: It will move only when recording.
RESET COUNT DISP/
MODE O.I.S. BARS ZEBRA
COUNT
MENU
HC-PV100_GC_GW_SQW0750-1_mst.book 60 ページ ２０１８年１１月１６日 金曜日 午後５時１４分