- 61 -
≥
The time code will reset when the built-in lithium battery is exhausted when it is set to
[FREE RUN].
You can set the initial time code.
1
Select the menu.
2
Touch the item to set and change with
/
.
≥
It will be set to 00h00m00s00f when the [Reset] is touched.
≥
“h” is an abbreviation for hour, “m” for minute, “s” for second and “f” for frame.
3
Touch [EXIT] to complete the setting.
Setting the Recording Counter
Recording Counter will display the recording time in seconds.
0:00:00 (hour : minute : second (When [REC COUNTER] is set to [TOTAL]))
SCN 0:00:00 (hour : minute : second (When [REC COUNTER] is set to [SCENE]))
Select the counting method during the recording.
Select the menu.
To reset the Recording Counter for the Recording
Mode
The Recording Counter will be set to 0:00:00 when
is
touched while displaying the counter.
[TC PRESET]
: [RECORD SETUP]
#
[TC PRESET]
[REC COUNTER]
: [DISP SETUP]
#
[REC COUNTER]
#
desired setting
[TOTAL]:
The count continues to increase until the Recording Counter is reset.
[SCENE]:
Resets the Recording Counter at start of recording. Counts the time
of each recording session.
MENU
MENU
RESET COUNT DISP/
MODE O.I.S. BARS ZEBRA
RESET
HC-PV100_GC_GW_SQW0750-1_mst.book 61 ページ ２０１８年１１月１６日 金曜日 午後５時１４分
