- 100 -
Connecting to a PC
A
USB 2.0 Cable (commercially-available)
B
Connect the Micro-B connector of the USB 2.0 cable, which matches this unit’s USB port in
shape.
≥
Insert the plugs as far as they will go.
1
Connect this unit to the AC adaptor.
≥
Use the AC adaptor to free you from worrying about the battery running down.
2
Turn on the unit.
3
Set [USB MODE SELECT] to [DEVICE].
4
Connect this unit to a PC.
≥
The USB function selection screen will appear.
5
Touch [PC] on the screen of this unit.
≥
This unit is automatically recognized as an external drive of the PC. (
≥
When you select an option other than [PC], reconnect the USB Cable.
≥
When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen to turn
the LCD monitor on.
≥
A USB 2.0 cable is not supplied with this unit. Use a commercially-available double-shielded
USB 2.0 cable with a ferrite core.
If possible, we recommend using a cable with a length of 1.5 m or less.
≥
When performing reading/writing between a PC and an SD card, be aware that some SD card
slots built into PCs and some SD card readers are not compatible with the SDHC Memory Card or
SDXC Memory Card.
≥
When using an SDXC Memory Card on your PC, check the following support site.
http://panasonic.net/avc/sdcard/information/SDXC.html
: [OTHER FUNCTION]
#
[USB MODE SELECT]
#
[DEVICE]
DEVICE
USB
Micro-B
MENU
HC-PV100_GC_GW_SQW0750-1_mst.book 100 ページ ２０１８年１１月１６日 金曜日 午後５時１４分
